Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Models & specificities
Back to menu
Reference
Price inc VAT
Pack.
Matter
Price inc VAT
KSING15
£57.98
by 2
Stainless
£57.98
KSING31
£57.98
by 2
Aluminium
£57.98
Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Descriptive
Back to menu
KORDA SINGLEZ System
This unprecedented rod holder system for carp fishing revolutionizes the "spike + buzzbar" fishing by cancelling out all its faults: with the Singlez your rods will be stable and will not rotate on the slightest pull.
The Korda Singlez system is produced by the JAG company with high quality stainless steel and allows you to choose and customize almost all the elements.
For a complete system (only referring to your front detectors, you will need to double each quantity if you also wish to equip your rear supports with the Singlez system), you will need: • 2 or 3 "Upright" detector supports depending on your number of rods. You will of course be able to do 2x2 if you have 4 rods. You have a choice between 3 lengths: 7.5 / 12.5/15cm, which will determine the height of your rod from the ground.
• A Singlez buzz bar, you can choose 3 lengths in 3 rods (23 / 25.5 and 29cm) or 4 lengths in 2 rods (11.5 / 12.5 / 15.5 / 16.5cm). You need 2 of 2 rods if you have 4 rods. • A "Spike" spike per buzzbar. • A "Spike ball" stabilizer per "Spike" spike. • An "Extension section spike" per "Spike" spike, it will increase the height of your rods from the ground, it is not mandatory but useful to pass over reeds for example.
Example for a 2 rod configuration for your detectors, for stalking (without holding the rods at the back) you will need: • 2 "Upright" supports of 15cm • 1 2 rod buzzbar 16.5cm • 1 "Spike" spike • 1 "Spike Ball" stabilizer
