Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Models & specificities
Back to menu
Reference
Price inc VAT
Pack.
Matter
Length (cm)
Price inc VAT
KSING01
£19.96
per unit
Stainless
9
£19.96
KSING02
£21.63
per unit
Stainless
12.5
£21.63
KSING03
£22.47
per unit
Stainless
16.5
£22.47
KSING17
KSING17
£19.96
per unit
Aluminium
9
£19.96
KSING18
KSING18
£21.63
per unit
Aluminium
12.5
£21.63
KSING19
KSING19
£22.47
per unit
Aluminium
16.5
£22.47
Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Descriptive
Back to menu
KORDA SINGLEZ System
This unprecedented rod holder system for carp fishing revolutionizes fishing in "spike + buzzbar" mode by cancelling all its defects: with the Singlez your rods will be stable and will not turn at the slightest pull.
The Korda Singlez system is made by JAG company with high-quality stainless steel and allows you to choose and customize almost all the elements.
For a complete system (pertaining only to your front detectors, you will need to double each quantity if you also want to equip your rear supports with the Singlez system), you need: • 2 or 3 "Upright" detector supports depending on the number of your rods. Of course you can go 2x2 if you have 4 rods. You can choose between 3 lengths: 7.5 / 12.5/15cm, both will determine the height of your rod in relation to the ground.
• A Singlez buzz bar, you can choose 3 lengths in 3 rods (23 / 25.5 and 29cm) or 4 lengths in 2 rods ( 11.5 / 12.5 / 15.5 / 16.5cm). You need 2 of 2 rods if you have 4 rods. • A "Spike" per buzzbar. • A "Spike ball" stabilizer per "Spike". • An "Extension section spike" per "Spike", it will increase the height of your rods from the ground, it is not essential but useful for getting over reeds for example.
Example for a 2-rod setting for your detectors, for stalking (without holding the rods at the back) you need: • 2 "Upright" supports of 15cm • 1 buzzbar 2 rods 16.5cm • 1 "Spike" • 1 "Spike Ball" stabilizer