Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Models & specificities
Back to menu
Reference
Price before tax
Price before tax
KSING16
€27.50
€27.50
Models & specificitiesDescriptiveReviewsA questionBesoin de formation
Descriptive
Back to menu
Double function bar: • Weighing bar • Once the carabiner is removed, it makes it easier to drive the Singlez Spike into the ground.
KORDA SINGLEZ System
This unprecedented rod holder system for carp fishing revolutionizes the "spike + buzzbar" fishing by canceling all its defects: with the Singlez your rods will be stable and will not turn at the slightest pull.
The Singlez Korda system is made by the JAG company with high-quality stainless steel and allows you to choose and customize almost all the elements.
For a complete system (relating only to your front detectors, you will have to multiply each quantity by two if you also want to equip your rear supports with the Singlez system), you need: • 2 or 3 "Upright" detector supports depending on your number of rods. You can of course do 2x2 if you have 4 rods. You have the choice between 3 lengths: 7.5 / 12.5/15cm, which will determine the height of your rod relative to the ground.
• A Singlez buzz bar, you can choose 3 lengths in 3 rods (23 / 25.5 and 29cm) or 4 lengths in 2 rods ( 11.5 / 12.5 / 15.5 / 16.5cm). You need 2 of 2 rods if you have 4 rods. • A "Spike" for each buzzbar. • A "Spike Ball" stabilizer for each "Spike". • A "Spike Extension" for each "Spike", which will increase the height of your rods relative to the ground, this is not essential but useful for going over reeds for example.
Example for a 2 rod configuration for your detectors, for stalking (without holding the rods at the rear) you need: • 2 "Upright" supports of 15cm • 1 buzzbar 2 rods 16.5cm • 1 "Spike" • 1 "Spike Ball" stabilizer
